Product Overview
Honda Pioneer 1000 / 1000-5 /1000-6 Pro Snow Plow for all Years
DENALI Pro Series UTV Snow Plows are ready for the snow season! Our team of engineers designed a Cadillac plow at a reasonable price so you don't have to skimp on quality to save money. This Center Mounted plow disperses the force of impact to the sturdiest part of the UTV and SxS, preventing damage to the front end or other vehicle parts from sudden impact.
Please Note: All Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, Max or Midnight winch with an automatic brake. We have all these winches available for a great price.
When Ordering: Choose the color Blade you would like and the Size you need. The 72" Plow Blade is $50.00 more. You will need Pushtubes and UTV Pushtubes are added in the price. If you need a lift kit for aftermarket Skid Plates or extended Pushtubes for UTVs with Tracks, those options are loaded for you. Hydroturn Systems are an option you may want for convenience of turning your Plow from side to side from the Cab. Finally Plow Pulley Fairlead Kits are designed to take the load off the cables and will extend their life. Standard Spools and Wide Spools are to work in with the Winch you already have or want to buy.
Kit Contents:
- UTV Snow Plow Blade - County / DOT Style
- UTV Pushtubes
- Specific Snow Plow Mount (you need to add from the cart, the price is included)
- One (1) Reversible Wearbar
- Rubber Flap
- Rubber Flap Stabilizer Bar
- Skid Feet
- Plow Markers
- Installation Hardware and Instructions
Blade Features:
- County-style blade (curved design) cuts wet snow & throws powder; made of 12-gauge steel
- Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar
- Sand-blasted powder coat with epoxy primer & TGIC Polyester top coat for corrosion protection, UV resistance and durability
- High strength, high yield 3/16 thick Grade 50 steel wear bar
- Angled Blade : 16 on the low side; 23 on the high side
- Rubber flap & stabilizer bar with rubber flap
- Height AND angle adjustable steel skid feet
- 3 Year Warranty
- Made in the USA
Pushtube Features:
- Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
- Turn system allows for easy positioning of the blade in 5 different angles - 0, 12.5°, 25°
- Simple detachment system with the pull of a pin
- Structural tube steel cross bar for added lateral rigidity
- Quick release pins included
- Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground
- Extended Push Tubes are designed to be used with SxS/UTVs that have tracks
Optional Winch:
The VIPER V2 winch is the next evolution in the long-trusted VIPER line of ATV/UTV winches. Sealed with an IP67 waterproof rating, and constructed with durable corrosion-resistant aluminum, V2 winches will handle whatever your outdoor lifestyle throws at them. Plus, every V2 comes with a wireless remote switch to make winching operations safer and more convenient. All V2s are hand-wound with your color choice of AmSteel®-Blue synthetic rope.
The VIPER V2 is a great choice for discerning riders who love to push their machines to the limits.
- Winch Features:
IP67 Waterproof Rating
Wireless Remote System with unique frequency
Planetary metal gear train and permanent magnet motor
Automatic brake
Kit Contents:
40' x ¼" diameter AmSteel®-Blue Synthetic Rope
Aluminum Hawse Fairlead
Wireless Remote Switch
Contactor & Wiring
Black Clevis Hook
Rocker Handlebar Switch
Rubber Line Stopper (two-piece)
Hand Saver Strap
Installation Hardware and Instructions - Winch Specs
Cable - AmSteel®-Blue Synthetic, 5,400lb max load rating
Motor - 12V DC, Sealed permanent magnet
Gearing / Gear Ratio - 3-Stage planetary/136:1
Brake - Automatic, 100% load holding
Clutch - Sliding Ring Gear
Wiring - 6 gauge (English)
Tie Rod, Fairlead Hardware, Motor Terminals - Stainless Steel
Mounting Bolt Pattern - 3.0 inch x 4.875 inch (76mm x 123.83mm) - Winch Dimensions:
15.125 (L) x 4.75 (H) x 4.75 (D) inches
20 lbs
Optional Lift Kit Features:
This allows you to match your height to the ground if you have added height to your UTV / Side x Side. These can work with Extended Pushtubes if you have added tracks too.
Optional Hydroturn Features:
- Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
- Change the blade angle while driving; full radius turn in just 10 seconds
- Heavy duty chrome plated ¾″ cylinder shaft
- No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
- Wire harness utilizes weatherproof connectors
Optional Plow Pulley Fairlead Features:
- Roller
- Replaces the winch fairlead during the plow season
- For use with Steel AND Synthetic cables
- Curved cable groove helps eliminate flattening and breaking of cable
- Bolt Patterns:
- Standard Spool: 3″ x 4.875″
- Wide Spool: 3" x 6.67″
- Sheave
- Includes pulley, 1/4″ clevis hook and nylon strap
- Allows greater precision when raising/lowering plow blade and increases the angle of pull
- Cable
- 12′ length, 1/4″ diameter
- Single braid, dyneema rope with galvanized steel thimble/eyelet
DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4″ steel and include all the
necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side
walls are formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an
impact resistant plow mount plate.
Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately.
Specs:
* 1/4″ steel
* 100% laser cut
* Black, industrial powder coat finish
* Includes mounting hardware and detailed instructions
Fitment:
2016+ Honda Pioneer 1000
2016+ Honda Pioneer 1000-5
2016+ Honda Pioneer 1000-6
Free shipping to the Lower 48 only!
